Safety Of Road Workers On Maintenance Of Highways Construction Essay

Safety Of Road Workers On Maintenance Of Highways Construction Essay Highways maintenance and road workers ensure that roads and pavements are safe and well maintained in towns, cities and rural areas throughout the country of operation. They might also build new roads and look after the repair, building and resurfacing of the countrys motorway networks. Highway maintenance safety involves safety of workers working on highway or road network services including road markings, pothole patching, road signs, road and footpath resurfacing, gully or drain cleaning, flooding, safety barriers, school crossing patrols, winter maintenance (snow removal), vegetation control, emergency services installing cats eyes, digging access trenches for cable and pipe laying, applying specialist surface treatments (such as high friction surfacing) traffic lights, fencing and street lamps and many more. All these maintenance activities need proper road safety awareness and control when they are executed, so working safely is aimed at staff from any road sector with no super visory or managerial responsibility to be made aware of the risks involved. It is of utmost importance to provide the essentials of health and safety for everyone at work to have an understanding of why they must work safely and this can be achieved by training road workers through the use of seminars and workshops. In Britain, roads are some of the busiest and dangerous in the world, but in today`s traffic conditions, it shows that live in carriageway of any highway is a very-very dangerous place to work and injuries to road workers have been increasing against the national trend. Road workers or operators will often be responsible for setting up warning signs, cones and temporary traffic lights and redirecting pedestrians. They may also manage traffic flow while colleagues are working, communicating with another operator via radio or hand signals further down the road are commonly used devices. As a road supervisor before conducting roadwork jobs, review the required tasks, location, and time of day to determine the necessary equipment, personnel, and materials required.   Plan how you will control traffic along the road and within the construction zone.   Have enough trained flaggers to complete your work.   Gather the signs, cones, flags, drums, and/or message boards that you will need for the job.   Inspect your signage to make sure it is in good repair and highly visible.   Clean or discard dirty equipment with limited visibility. Get training on traffic control and safe work practices.   Set up and maintain your roadside work zone properly.   Get training on the equipment that you will use and drive, from the smallest tool to the largest moving vehicle.   The operation of tools and equipment must be according to the manufacturers recommendations.   Know the hazards of the chemicals and materials that you use and get training on the personal protective equipment that you are required to wear, including its uses and limitations.   Wear high visibility garments on your legs and chest.   Wear your assigned persona protective equipments, including a hardhat, safety shoes, and work gloves.   Consider earplugs or muffs, safety glasses, and fall protection depending on the job task. In the work zone, workers must watch for fast-moving motorists and large construction equipment.   Set up parking zones for your working vehicles such that they have safe entrances and exits from the highway that is maintained and group your vehicles on the same side of the road for visibility.   As a supervisor you can set-up the job site and tasks to minimize the need to cross the active road time and again and also  set up traffic lanes within the jobsite for clear access and visibility. When working on road, work facing traffic and stay alert, or station a lookout to watch oncoming traffic.  The workers should have an escape route or a plan of action in place for any emergencies.   Watch for backing vehicles because the driver often has a limited view.   Practice good communication and make sure all vehicles have backup alarms.   If you are flagging, acting as a lookout or traffic director you must remain alert,  do not drink, smoke, or have a conversation while performing these duties. Road work is a physical job requiring strength and endurance, worker must  stay fit so that their bodies can do the work.  Road work occurs in all types of weather and throughout the year.  They should wear appropriate clothing for the climate.   Light coloured layers and sunscreen protect them during the hot months while layers of moisture-wicking clothing protect you in the cold.   The road workers must get plenty of rest, eat right, and drink no-alcoholic drink s enough to stay healthy and alert on the job. From the Road Workers Perspective, there are few jobs more important than highway maintenance. It may go largely unappreciated by the end customer the motorist, but road workers are looking after some of the busiest roads in the world in the face of continued growth in Britains vehicle fleet, and the inevitable consequences of that growth for wear-and-tear on the network. And by helping to tackle congestion, road workers are directly supporting the British economy. And they do this despite working in some of the most difficult conditions that anyone has to tolerate. The risk of death or injury at work, faced daily by the workers who maintain Englands motorways and trunk roads, is highlighted by the results of a recent industry survey. Almost one in five workers suffers some injury caused by passing vehicles in the course of their careers while working on our road network. More than three-quarters suffer verbal abuse from drivers, and many have reported having objects thrown at them by motorists. Road Workers even change the light bulbs in the central reservation. Surveys have been previously contacted and road workers were asked if they had experienced near miss, verbal abuse, slight personal injury, major personal injury caused by road users vehicle and the responses were: 13% of road workers surveyed had sustained slight injuries; 3% had sustained major injuries; 77% had suffered verbal abuse from passing drivers 54% had a near miss with a vehicle 40% had experienced missiles deliberately thrown at them From these studies road workers felt most at risk during the morning and evening peak travel periods and in the early hours of the morning. There are believes that there is a vital need to educate drivers to start taking the problem of speeding and the outcomes of speeding more seriously. The habitual speeders know that other people dont necessarily disapprove of their actions in the same way as they disapprove of drink-driving syndrome. It took a long time to change attitudes to drink-driving, but by communicating the message at every opportunity, with intelligent advertising and marketing, the Government can and has eventually succeeded in most countries, likewise today, drink-driving is socially unacceptable in the community. Therefore a similar change is required with speeding and peoples attitude to road works. In UK, Highway Traffic Management Agency was launched in 2005 and since it was launched issues that dominated are the road maintenance safeties. Its goal is to have zero road injuries and zero fatalities by getting a reasonable balance between the needs of the road user and the safety of road workers using a risk based approach as a short term. The long-term aim was to plan future improvements that make the working environment safer, including: design for maintenance/operation, which has the added benefits of whole-life cost savings, less interventions and less congestion; reduce road workers exposure to live traffic and lessen the risks to road workers when on the network; highlight the importance of road workers and their safety to the public by raising awareness and the industry consistently maintaining the highest standards. Finally it was to improve road user awareness and responses by improving driver education. At a general level, the government has taken the Road Safety Bill through Parliament, including new drink-driving legislation, driver training schemes, and a revised penalty system and is looking at improvements to the speed camera network and working with the police to fight back against anti-social use of roads. The Highways Agency Road Worker Safety Action Plan was unveiled at the conference held in 2006, with some of potential solutions listed in the including a review of procedures to reduce the exposure of road workers to live traffic and cut the risks of working on the highway. A review of maintenance priorities so workers dont have to be on the network so often more targeted speed limits at road works which can be altered to match safety requirements. Improving of the accuracy and content of variable message signs to give road users more warning of works and the presence of road workers also improving the training of workers on high-speed roads, the promotion of better driver awareness and improved driver education, also finally the development of an incident and near-miss reporting centre. The Importance of Traffic Management When considering the traffic management plan for any major scheme the safety and security of both the travelling public and the workforce is the primary aim. By the very nature of road works operations, the element of risk is introduced when managing traffic on high speed roads. The first essential element is to reduce the risk by reducing the speed. This can be achieved to a certain extent through the use of traffic management measures but experience has proven that the only reliable way of achieving consistently reduced speeds is through the use of safety cameras. The introduction of a temporary speed limit and safety cameras is done in conjunction with the respective Safety Camera Partnership, who follow a risk assessment process which considers the level of exposure to risk of the public and the workforce. This is the reason that a variety of different traffic management measures can often be found at road works sites. However, the biggest single risk to road workers occurs not i n major schemes but during routine maintenance operations and emergency lane closures. During these operations it is often only a line of cones that separates the workforce from high speed traffic. During these operations there is a clear need for motorists to act responsibly and respect the rights of road workers. Planning Road works Traditionally, if there is one thing that causes motorists more frustration than any other, it is the overnight appearance of a forest of cones with little or no warning or information as to the reason. Hopefully, this aspect is largely becoming a thing of the past as a significant amount of planning is now undertaken prior to any major road works scheme. Such projects are now often planned several years ahead taking cognisance of issues such as the optimum time and the likelihood of reliable weather where this is a requirement. The substantial rise in traffic volumes over the past decade has significantly impacted on road works planning, through not just the increased maintenance requirements brought about by the additional volume, but through the challenges to keep congestion at a minimum as any reduction in available road space can have significant consequences for journey times. While safety and security are the primary drivers when planning road works, contractors also incorpora te extensive consultation with affected local communities and a targeted media campaign designed to advise drivers who use the affected route of the proposed works and levels of disruption. This forward planning and awareness through the media allows for drivers to plan their journey accordingly. Engineering technology on road worker`s risk. This can be achieved both through measures at the construction stage and through the use of new and improved technology for maintenance operations. New construction processes and standards mean a much longer design life can be achieved at the outset, significantly reducing the amount of routine maintenance operations required. In addition, where a maintenance requirement is identified during construction, the facility to achieve this without significantly impacting on traffic flow is considered carefully and where appropriate, additional engineering measures are introduced. In respect to maintenance operations on existing structures and highways the Highway Traffic Management Agency has been actively involved in developing technology in association with the Highways Agency, and over the past few years a number of innovative solutions which have had a positive impact on safety have been introduced. New techniques to improve safety and reduce congestion at road works on high-speed road s, for example, are now undergoing trials. Automated cone laying machines, fixed to the rear of a traffic management vehicles, can place and collect standard road cones without the need for road workers to stand in a live carriageway next to fast moving traffic. The machines accurately positions cones on the road surface at 15mph laying up to 40 cones per minute and reducing the time taken to establish and remove temporary traffic management. Road users will benefit from the shorter period of time taken to change from normal carriageway to a coned-off area. Using the new machines, traffic cones will be laid and taken up more quickly, removing manual handling and enabling more routine maintenance work to be undertaken during each closure so reducing the frequency of road works and congestion. A new barrier transfer machine, which can lift 12 tons of concrete safety barriers for motorway road works into place at a speed of 7 mph, is also now in operation, offering a higher level of b arrier protection to motorway road workers. The mechanical broom which are now mostly used have improved the road worker`s safety and compared to manual sweeping. In June 2006, a new revised Chapter 8 of the Traffic Signs Manual was launched that gives guidance on best practice for temporary signing and management of traffic on the highway. Also it was designed to make traffic management for road works safer and less stressful for both workers and drivers. It talks about new measures like flashing cones on the approach to works; mobile carriageway closures; and improved incident management. It also encourages more effective use of speed limits at road works. Drivers should expect consistent limits to be set depending on the work being carried out, without confusing variations. That should be combined with speed detection equipment and other methods of persuading people to reduce speed. RECOMMENDATIONS Changing the behaviour of risk-taking drivers tends to require hard interventions, which require the involvement of police or other law enforcement organisations. For complying drivers, soft interventions such as the Respect campaign can be used; other interventions that could be applied to the issue of road worker safety and driver behaviour can include: Training road workers By training road workers through the use of seminars and workshops can make them aware of their risks and conscientious those involved on how best they can be aware of the job related risks. Improving driver skills There is a need for further training of professional drivers and specific training of all drivers to raise their awareness of the issues of driving through road works. Better self knowledge The public are an important partner in improving safety through road works. There is a need for greater awareness of personal skill levels and abilities to encourage better self pacing and improved behaviour when driving. This can be achieved through a high profile advertising campaign to raise the public profile of road worker safety. Such an approach aims to demonstrate the risk to drivers and road workers from speeding through road works. Improving the task It is important to ensure that the driving task when approaching and driving through road works is made as simple as possible to prevent overloading drivers with information. All those involved in applying the principles contained in the Traffic Signs Manual: Chapter 8 need to review their road works layouts in order to make the driving task as easy possible for an uninformed driver CONCLUSION It can be concluded that the behaviour of drivers towards road workers indicates that there is little respect for road works and road workers. At best the works and workers are tolerated, at worst the works are ignored and workers are abused either verbally or physically. Changing the attitude of drivers to road works is essential to improve the safety of both road workers and the drivers passing through road work sites. The behaviour of road drivers is directly or indirectly the cause of most road accidents, including those at road works. Influencing driver`s behaviour to prevent accidents at road works will improve road worker safety as well as that of the road user.

Friends Essay -- essays papers

Friends Friends are a necessity in every child’s life. They are there to comfort, to laugh with, and to create wonderful memories. All of a sudden a child grows up and gets thrown into college. His or her friends go to other colleges, and they both realize that they aren’t going to have those close friendships anymore. It has happened many times before, and it will happen many times again. What one needs to know is that college isn’t a place to mope around; it is a place to rejoice and meet new people. College is a place where one develops skills in meeting new people and creating new friendships. This skill is not just learned and then lost. It is a skill that can be used anywhere and any time thought life. The hardest part is to get the ball rolling and start meeting new people. College is not a difficult place to meet people. They are everywhere; in dorms, in classrooms, and simply walking around outside. Although this is a perfect atmosphere for meeting people, some may still have difficulty. The greatest challenge about meeting people is not only the hoping that...

Brazil’s Political Factor in Business

Political factor by ashraful islam Trade Policies in political factor Brazil's economic history has been influenced remarkably by foreign trade trends and policies. Successive cycles of export booms in such commodities as sugar, gold and diamonds, rubber, and coffee played major roles in Brazilian development before World War II. In the 1930s, the collapse of coffee prices signaled a turn inward, resulting in a nascent industrialization. In succeeding decades, industrial development was fostered deliberately through restrictive trade policies, making Brazil a relatively closed economy by the mid-1960s.Only in the early 1990s did Brazil begin significant liberalization of its trade policies, and even these reforms were modest by comparison with those in a number of other Latin American nations. Government intervention in foreign trade has a long history in Brazil, reaching back to the colonial period when Portugal forbade Brazilian trade with other nations. Following independence in 1 822, Brazil opened its ports and expanded its trade with other nations, particularly Britain. Extensive government regulation of trade continued, however, with tariffs providing over half of the government's revenue before World War I.Other forms of intervention in trade included the 1906 coffee price support plan, which was a sophisticated attempt to exploit Brazil's monopolistic position in the world coffee market. Before World War II, trade policies were used mostly as a source of revenue or as a response to specific groups such as the coffee producers, rather than as a means of achieving national economic goals. In the early 1950s, Brazil began to use trade policy in a more deliberate way to promote industrialization. The forced reduction in Brazilian imports after 1929 had resulted in the first major industrial growth in Brazil, centered in Sao Paulo.Heeding this apparent lesson, policy makers in the 1950s argued that measures that deliberately reduced imports would stimulate d omestic production, thereby encouraging technological development and increasing employment in activities that were regarded as more â€Å"modern† than Brazil's traditional agricultural and extractive activities. The steep rise in world oil prices that began in late 1973 soon ended Brazil's move toward greater trade openness. The approximate balance between imports and exports in the early 1970s became an unprecedented US$4. billion deficit in 1974. Although record levels of external capital flows financed this deficit, Brazilian policy makers responded by restricting imports. In June 1974, import financing for many products was suspended, while tariff rates on more than 900 items were doubled. Over the year, restrictions were increased further, and in 1975 the government required that imports be paid for in advance with deposits that did not earn interest or any correction for inflation. On the export side, further measures were taken to promote exports, especially for manuf actures.Despite these measures, Brazil's trade balance remained in deficit for most of the 1970s. The combination of tightened import controls, real depreciation, and the fall in domestic demand induced by the restrictive macroeconomic policies of the early 1980s resulted in a sharp adjustment in Brazil's external accounts. The magnitude of the adjustment appears to have surprised even many of its proponents, both in the Brazilian government and among creditors. After 1983 the massive trade surpluses averaged more than 3 percent of GDP, compared with negative or negligible levels through most of the 1968-82 period.In 1984, as the full effects of the adjustment program were felt, exports were about double imports, and Brazil's trade surplus reached an unprecedented 6. 1 percent of GDP, far exceeding the comparable shares in other important economies such as Japan (3. 5 percent of GDP) and West Germany (3. 8 percent). By 1984 it was clear that the successful external adjustment had a domestic price, as inflation accelerated to more than 200 percent at annual rates. Trade policy consequently began to be viewed as a potential instrument for internal stabilization, with some import liberalization viewed as a potential contributor to reduced inflation.In late 1984, a number of the direct controls on imports were cut back, and the number of products on the negative list was reduced substantially. Import financing requirements were also relaxed through exemptions, and tariff surcharges were replaced by smaller additions to the legal tariff. On the administrative side, the Cacex policy of import restrictions for balance of payments purposes was reduced. Although import licenses were not abolished, their approval became a relatively routine operation, and by 1991 most licenses were being issued within five working days.The CTIC became primarily a reporting and registration agency, which had little of the discretionary power formerly exercised by Cacex. The former CPA, w hich had been far overshadowed by Cacex, was replaced by an agency coequal with the CTIC, the Technical Coordinating Office for Tariffs (Coordenadoria Tecnica de Tarifas–CTT). With the shift in emphasis in trade policy from discretionary administrative control to the automaticity of published tariffs, many of them limited by Brazil's treaty commitments, the CTT's role in formulating import policy became significantly greater than the CPA's had been.Early in 1991, the Collor de Mello government announced a series of tariff reductions to be phased in over the 1991-94 period. These were among the most far-reaching and significant reductions in Brazilian trade protection in several decades. Earlier tariff reductions often had been largely cosmetic, only reducing rates that were prohibitive to high levels that still barred many imports. The 1991 reforms went much further, and in many sectors reduced rates to about a third of their level in the early 1980s.Equally important, the re forms reduced the wide variability or dispersion of tariff rates that were once characteristic of Brazilian trade policy. The overall trend in Brazilian trade policy is clear. By the mid-1990s, Brazil had become a much more open economy than it had been a decade earlier. priorities in terms of business support Market Overview The Federative Republic of Brazil is Latin America's biggest economy and is the fifth largest country in the world in terms of land mass and population with about 192 million people.Brazil’s economy, the 6th largest in the world, grew 2. 7% in 2011. Growth slowed due to reduced demand for Brazilian exports in Europe and Asia, despite solid domestic demand and a growing middle class. During the past decade, the country has maintained macroeconomic policies that controlled inflation and promoted economic growth. Inflation was at 6. 5% in 2011, and urban unemployment reached a historic low of 6. 0%. Interest rates, though high compared to the rest of the wo rld, remained historically low at the Central Bank benchmark rate of 8. 0% as of July 2012. In 2011, the U. S. as Brazil’s largest source of imports followed by China, Argentina, Germany, and South Korea. U. S. merchandise exports to Brazil in 2011 were US$42. 9 billion, and U. S. imports from Brazil were US$31. 3 billion. Market Challenges Brazil has a large and diversified economy that offers U. S. companies many opportunities to export their goods and services, and U. S. exports are increasing rapidly. Doing business in Brazil requires intimate knowledge of the local environment, including both the explicit as well as implicit costs of doing business (referred to as the â€Å"Custo Brasil†).Such costs are often related to distribution, government procedures, employee benefits, environmental laws, and a complex tax structure. Logistics pose a particular challenge, given infrastructure limitations posed by nearly a decade of economic expansion. In addition to tariffs, U. S. companies will find a complex customs and legal system. Market Opportunities There are few, if any, sectors in Brazil that do not have excellent short term opportunities. Certain sectors of the Brazilian market have experienced higher than average growth, such as air transportation, telecoms, oil and gas, and mining.Under the second phase of the Growth Acceleration Program (PAC II), the Government of Brazil will spend R$955 billion (the equivalent of around US$470 billion) in development of the country’s energy generation and distribution system, roads, railroads, ports, and airports as well as stadiums as it prepares for the World Cup in 2014 and the Olympics in 2016. Other promising areas for U. S. exports and investment include agriculture, agricultural equipment, building and construction, aerospace and aviation, electrical power, safety and security devices, environmental technologies, retail, and transportation.The Brazilian national oil company Petrobras' expans ion may represent the largest global business opportunity in the oil & gas sector until 2020. The offshore pre-salt oil deposits discovered in 2006 and 2007 are estimated to exceed 60 billion barrels in probable or recoverable reserves, and could place Brazil among the world’s top ten oil-producing countries. Petrobras anticipates that it will invest $224 billion in exploration and development through 2015. Brazil is one of the largest IT markets within the emerging economies. IT end-user spending in Brazil is expected to grow to $134 billion in 2014.The largest share of spending will be on telecom equipment, representing 72% of the market, followed by IT services at 13. 3% and computing hardware at 11. 9%. In the years leading up to the 2016 Olympic Games in Rio de Janeiro, Brazil will host several international mega-events. In 2011, Brazil hosted the World Military Games and the Pan-American Maccabi Games and in 2012, Rio de Janeiro hosted the Rio+20 global environmental su stainability conference. In 2013, Brazil will host a papal visit and the World Youth Day event as well as the soccer Confederations Cup.In 2014, twelve Brazilian cities will host the soccer World Cup. The Government of Brazil expects to invest $106 billion in the preparations for these events. These investments, which will include outlays for infrastructure, construction, transportation systems, port improvements, public security, and airport infrastructure upgrades, will present significant commercial opportunities for U. S. companies. Most of the major infrastructure upgrades will be carried out through Public-Private Partnerships under Brazil’s Growth Acceleration Program. Market Entry StrategyBrazil’s business culture relies heavily on the development of strong personal relationships. Companies need a local presence and must invest time in developing relationships in Brazil. The U. S. Commercial Service encourages U. S. companies visiting Brazil to meet one-on-one with potential partners. One of the best ways for U. S. companies to enter the Brazilian market is by participating in local trade shows or using the U. S. Commercial Service’s Gold Key Service (GKS), through which they can meet with pre-screened potential clients or partners.It is essential to work through a qualified representative or distributor when developing the Brazilian market. Some firms establish an office or joint venture in Brazil. Further discussion of these alternatives can be found in the â€Å"Marketing Products & Services† chapter. It is very difficult for U. S. companies to get involved in public sector procurement without a local Brazilian partner. Education of the workforce Despite being one of the world's most populous countries, Brazil does not have a single university ranked in the top 100 internationally.Of its college graduates, 5 percent are engineers, far below the rates of countries such as China and South Korea, according to Brazilian busin esses. Since Brazil's education system is falling short, Vale, like several other Brazilian companies, has decided to build its own. â€Å"For years, technical education was not the main focus of the government,† said Marco Dalpozzo, Vale's global human resources director. â€Å"Mining was not seen for the last 20 years as a great opportunity or a vocational business opportunity for the country. So you have professions for which Vale had to create their own entire system of education. Over the past few years, several Latin American countries have enjoyed soaring growth rates as they exported oil, minerals and agricultural products around the world. In Brazil, gross domestic product more than doubled, to $1. 3 trillion, in the five years ending in 2007, while inflation dropped to 3. 6 percent, a quarter of the 2003 level. Yet recent studies have shown that workers in Latin America have less education than those in East Asia and Eastern Europe and that the percentage of studen ts enrolled in high school is far lower than in developed countries.In Colombia, one out of every 700,000 people receive PhDs, compared with one in 5,000 in developed countries, wrote Jeffrey M. Puryear and Tamara Ortega Goodspeed in a contribution to a book published this year titled â€Å"Can Latin America Compete? † â€Å"The region's limited number of scientists and advanced degree recipients weakens the region's competitiveness by limiting countries' ability to use and generate knowledge, and to carry out research,† they wrote.For younger students, Latin American countries have focused in recent years on building schools and expanding access to public education, rather than improving the quality of that education, said Emiliana Vegas, a senior education economist at the World Bank. Teachers' pay raises are based on longevity rather than performance, and few parents are used to demanding more rigorous standards. â€Å"Most Latin American parents have less educatio n than their kids. They feel their kids are already receiving an advantage they didn't get,† said Vegas, who co-authored the book â€Å"Raising Student Learning in Latin America. In the most recent results of the Organization for Economic Cooperation and Development's triennial tests of 15-year-olds from 57 countries, the Latin American countries that participated, including Brazil, Argentina and Colombia, consistently scored near the bottom. â€Å"It's not just that kids need to go to school, they need to learn in school,† Vegas said. Brazil – quality of port infrastructure Quality of port infrastructure, WEF (1=extremely underdeveloped to 7=well developed and efficient by international standards)Definition: Quality of Port Infrastructure measures business executives' perceptions of their country's port facilities. The rating ranges from 1 to 7, with a higher score indicating better development of port infrastructure. Source: World Economic Forum, Global Compet iveness Report |Year |Value | |2007 |2. 63 | |2008 |2. 52 | |2009 |2. 65 | |2010 |2. 94 | |2011 |2. 70 | Airports The Brazilian airport network has long been lamented as underdeveloped and poorly maintained. The network is run almost exclusively by Infraero, an authority that reports to the country? s defense ministry.In operation for 37 years, Infraero has more than 28,000 employees and contractors assisting in the management of 67 airports throughout the country. These airports handle 97 percent of all air traffic in the country, with more than 2 million takeoffs and landings and over 113 million passengers annually. 11 The company? s charge is quite difficult, considering that the airports are spread across a country the size of the contiguous United States Roadways Like the United States, Brazil is heavily dependent on its road system for transportation. However, there is great disparity in the quality of these road networks.Despite constituting 68 percent of Brazil? s transport needs, only 12 percent of the country? s 1. 6 million kilometers of roads are paved. 20 The consequence of these infrastructure deficiencies is slower and more expensive transport – costs can be up to 35 percent greater on unpaved roads. 21 This affects the booming agricultural sector greatly, as many of the goods are produced in remote locations with poor road conditions. Rail Brazil? s national rail network consists of approximately 28,000 kilometers of track, and most of it is operated by private concessionaires.These concessions have been utilized for 12 years, and the government is reviewing its concession model to make better use of the rail network. â€Å"One of the main objectives of the changes is to put abandoned or low-capacity stretches back into operation. †29 As part of the Ministry of Transport? s National Plan, Brazil will consolidate a new rail network, developing almost 12,000 additional kilometers of track. 30 These rail lines will serve areas of ag ricultural and mineral productivity and enable the increased transfer of cargo between transportation modes.Additionally, the rail lines will be implemented in planned corridors that are specifically designed to link production and consumption regions, as well as production and shipment areas (like ports). The MOT is also studying the feasibility of a corridor that will link railways from Brazil, Paraguay, Argentina, Bolivia and Chile. Economic factors by ashraful islam Economy – overview: Characterized by large and well-developed agricultural, mining, manufacturing, and service sectors, Brazil's economy outweighs that of all other South American countries, and Brazil is expanding its presence in world markets.Since 2003, Brazil has steadily improved its macroeconomic stability, building up foreign reserves, and reducing its debt profile by shifting its debt burden toward real denominated and domestically held instruments. In 2008, Brazil became a net external creditor and tw o ratings agencies awarded investment grade status to its debt. After strong growth in 2007 and 2008, the onset of the global financial crisis hit Brazil in 2008. Brazil experienced two quarters of recession, as global demand for Brazil's commodity-based exports dwindled and external credit dried up.However, Brazil was one of the first emerging markets to begin a recovery. In 2010, consumer and investor confidence revived and GDP growth reached 7. 5%, the highest growth rate in the past 25 years. Rising inflation led the authorities to take measures to cool the economy; these actions and the deteriorating international economic situation slowed growth to 2. 7% for 2011 as a whole, though forecasts for 2012 growth are somewhat higher. Despite slower growth in 2011, Brazil overtook the United Kingdom as the world's seventh largest economy in terms of GDP.Urban unemployment is at the historic low of 4. 7% (December 2011), and Brazil's traditionally high level of income equality has dec lined for each of the last 12 years. Brazil's high interest rates make it an attractive destination for foreign investors. Large capital inflows over the past several years have contributed to the appreciation of the currency, hurting the competitiveness of Brazilian manufacturing and leading the government to intervene in foreign exchanges markets and raise taxes on some foreign capital inflows.President Dilma ROUSSEFF has retained the previous administration's commitment to inflation targeting by the central bank, a floating exchange rate, and fiscal restraint. | | | | |Brazil Interest Rate | | |The benchmark interest rate in Brazil was last reported at 7. 25 percent. Historically, from 1999 until 2012, Brazil Interest | | |Rate averaged 16. 6 Percent reaching an all time high of 45. 00 Percent in March of 1999 and a record low of 7. 25 Percent in | | |October of 2012. In Brazil, interest rate decisions are taken by The Central Bank of Brazil's Monetary Policy Committee | | |(CO POM). The official interest rate is the Special System of Clearance and Custody rate (SELIC) which is the overnight lending | | |rate. This page includes a chart with historical data for Brazil Interest Rate. | [pic] Brazil Income Taxes 2012 Last partial update, May 2012Individual Income Tax: Brazil's individual income tax rates for 2012 are progressive, from 7. 5% to 27. 5%. Personal annual tax rates 2012 (BRL) |Income (BRL) |% | |1-18,799 |- | |18,799-28,174 |7. 5 | |28,174-37,566 |15 | |37,566-46,939 |22. 5 | |over 46,939 |27. 5 |Note: Nonresidents pay a flat 27. 5% tax on income earned in Brazil Corporate Tax: Brazil's combined corporate tax rate for 2012 is 34%. The tax consists of a basic tax of 15%. There is also a surtax of 10% for annual income of over BRL 240,000, about $ 110,000. Additonal 9% are added for social contribution on net profits. Capital Gains: Capital gains of companies are added to the regular income. Individuals: Pay 15% tax on capital gains, dividend incom e from local companies is tax exempt. Residence A foreign company is resident if incorporated in Brazil.An individual is resident when holding a permanent visa, or a temporary visa with an employment agreement, or even without an employment agreement, when staying in Brazil for more than 183 days within 12 months. Brazil Tax Deductions †¢ Losses are carried forward indefinitely. In future years only 30% of the current year taxable income can be set off against the loss. †¢ Depreciation is deducted using the straight line method. Companies working in 2 shifts can claim 150% of the standard rates, while companies working in 3 shifts are entitled to 200% of the standard rates. Companies involved in development of technical research can use accelerated depreciation for tax purpose. †¢ There is no company consolidation for tax purpose. †¢ Thin capitalisation rules relating to interest expenses are in effect in Brazil from 1. 1. 2010. Brazil Personal Credits and Deduct ions For Brazilian residents, the first annual income of BRL 18,799 is tax exempt. There is a standard monthly deduction for each dependant. Education expenses are deductible, up to a limit. Deductions are also permitted for social security payments by an employee, payments to private Brazilian pension plans, up tp a limit, and for alimony payments.Deduction of Tax at Source In Brazil tax is deducted at source from the following payments to non residents: Dividend- 0%. Interest- 15%/25%. Royalties- 15%. Services -15%/25%. Social Security The contributions by the employer and the employee are subject to to ceiling defined by law. Employer: 37. 3% of the gross salary, 28. 8% social security and 8. 5% for severance fund. Employee: 7. 65%-11% of the gross salary. The employee's payment, which is capped, is based on a â€Å"contribution salary table†, provided by the government.

The Sentencing Policy And The Criminal Justice System

There are many current criminal justice policies and laws that demonstrate how the policy has been informed by the theories that have been covered this semester. Many connections are not explicit but offer great detail in offering information based on the given topics. The current criminal justice policy that I’ve chosen was the sentencing policy. The sentencing policy was put together to reach every type of case that could possibly be seen in the criminal justice system. Here we will further discuss the sentencing policy, a case that I found to be a great example to understand the sentencing policy and how it can be overused, then we will move into how this policy have been informed by the rational choice theory, next we will cover its underlying assumptions and some of the ways it deviate, lastly we will discuss our alternative course of action which is the deterrence theory. In 1984 there was a Sentencing Reform Act and it was developed to enhance the ability of the criminal justice system to handle and effective and fair sentencing system (United States Sentencing Commission, 2015). To successfully reach the goal and purpose of the sentencing policy there must first be honesty in the verdicts of all sentencing (United States Sentencing Commission, 2015). Secondly, there must be reasonable uniformity when sentencing similar offenders who committed the same sort of crime (United States Sentencing Commission, 2015). Third, there must be proportionality when sentencing withShow MoreRelatedThe Law Of A Uniform Sentencing Guidelines1126 Words   |  5 Pagesoffenders. In India, a uniform sentencing policy does not exist, as neither the legislature nor the judiciary has supplied any formal guidelines. However, the need for the same has been repeatedly recognized by both. For instance, the Committee on Reforms of Criminal Justice System (Malimath Committee) pu blished its report in March 2003, stating the need for uniform sentencing guidelines: The Committee recommends that a statutory Committee be constituted to lay down sentencing guidelines to regulate theRead MoreThe Goals of Sentencing in the Criminal Justice System1747 Words   |  7 PagesThe Goals of Sentencing in the Criminal Justice System By: Brian Ouellette Criminal Justice CCJ 1020 Mr. Leonardo Cadogan Abstract In the United States there is no standard when it comes to punishment and sentencing. This area of the  criminal justice system is in a constant state of change. Sentencing practices and goals are always being closely examined. From getting tough on crime to more rehabilitative approaches, the views and goals of sentencing are always beingRead MoreMandatory Minimum Sentencing Laws For Drug Offences1089 Words   |  5 Pagesmandatory minimum sentencing laws for drug offences. This issue has been extensively researched by Kieran Riley with an article in the Boston University Law Journal titled â€Å"Trial by Legislature: Why Statutory Mandatory Minimum Sentences Violate the Separation of Powers Doctrine†, Paul Cassell and Erik Luna with a peer-reviewed scholarly article titled â€Å"Sense and Sensibility in Mandatory Minimum Sentencing†, and the Families Against Mandatory Minimums organization with a policy report. All of theseRead MoreCriminal Punishment And The Criminal Justice System1193 Words   |  5 Pagesthe criminal justice system apply as much influence over the life, liberty and the pursuit of happiness of criminal offenders as the final sentencing decision. Judges have an extensive range of sentencing options. These options range from fines, restitution, and probation to incarceration in jail or prison. For much of the 20th century, criminal sentencing practices remained largely unchanged in the United States. Over the past few decades, we have witnessed a practical revolution in criminal punishmentRead More235764916 CJA 394 Week 1 Criminal Justice Overview Paper SAMPLE page only1665 Words   |  7 Pagesselected issue affects the criminal justice system as a whole. †¢ Describe some of the change(s) the criminal justice system as a whole has made in response to the issue you selected. †¢ Include your opinion on whether the changes are sufficient. Should more changes be made, and if so, what changes?   Format your paper consistent with APA guidelines. Prison Overcrowding CJA/394 Prison Overcrowding One of the greatest challenges currently facing the American criminal justice system is overcrowding. AmericaRead MoreThe Failure of the War on Drugs Essay1529 Words   |  7 Pagesboth the incarceration rates and activities of the criminal justice system. Many politicians and advocates of the policy claim that the War on Drugs is a necessary element to deter criminal behavior and reduce the crime rate. However, studies show that drug deterrent policies on possession and use have been inadequate and unsuccessful (Cole Gertz, 2013). Studies also show that the War on Drugs has not attained its objectives because the policy exhibits racial discrepancy as it has led to the disproportionateRead MoreMandatory Minimum Sentencing On Violent Crimes Essay1492 Words   |  6 PagesJ’son West Nov. 12. 2016 CJ 202 Canon Mandatory Minimum Sentencing on Violent Crimes Crime in America is growing at a substantial rate and repeat offenders are playing a huge roll in this growth. Mandatory minimum sentences, first established in Connecticut in 1969 and expanded throughout the 1980s and 1990s, exemplify a shift in public policy to impose a specific amount of imprisonment based on the crime committed and the defendant’s criminal history, and away from other individual offender characteristicsRead MoreCriminal Justice Systems And Its Effect On Parole Board1711 Words   |  7 PagesVictoria criminal justice systems , are designed to regulate members’ attitudes in the society, implement law and order, and to bring those offenders who commit crimes before the court of justice. In the assessment paper, observation was conducted through a range of scholarly research/ newspaper reports, articles, The age, Herald Sun, Victorian General news wires. Critical analysis , was also conducted to different issues, thus; Victorian government tougher sentencing on crimes to implementRead MoreThe Sentencing Reform Act Of 19841526 Words   |  7 PagesThe Sentencing Reform Act is associated with the Comprehensive Crime Control Act of 1984, were the U.S. federal statute increased the consistency in the United States federal sentencing. The Sentencing Reform Act created the United States Sentencing Commission. This act allowed the independent commission into the judicial branch of the United States Sentencing Commission. It consists of seven voting members and one nonvoting member. For the sake of the United States Sentencing Commission, thereRead MoreJuvenile Justice And Criminal Justice1368 Words   |  6 Pages The border between juvenile justice and criminal justice did not endure the juvenile court’s first century. By the 1980s, there was general disappointment with both the means and the ends of normal juvenile justice. As with every other social repair efforts, it is difficult to say whether frustration with juvenile justice was born of erroneous concept or of wretched execution. The administering accepted by justice policy, however, was unmistakable. Juvenile courts began to adopt the sentiment and

Obscenity In Fun Home. ​​Should It Be Acceptable To Implement

Obscenity in Fun Home Should it be acceptable to implement obscene literature in the education curriculum, even at the cost of one’s moral beliefs? Fun Home, written by Alison Bechdel, is a graphic memoir that illustrates the relationship of the character Alison with her father, Bruce. Although they did not share an intimate father-daughter bond in Alison’s childhood, Alison grows up to bear many of her father’s traits, such as being queer. Unfortunately, her memories with her father are short-lived, as her father commits suicide when she turned twenty. As a result, she attempts to unlock her closeted father’s life and understand his struggles. A recurring theme throughout Fun Home is sexuality and is often demonstrated through†¦show more content†¦The College of Charleston had assigned Fun Home to the incoming students. The House lawmakers were not pleased with Fun Home’s theme of homosexuality and the text’s depiction of sexual imagery. Some students, in retaliation had organized protests convincing the governor to stop the House from cutting down the funds (McCammon, 2014). On the other hand, some students down in North Carolina, one being Brain Grasso, agreed to the fact that the story contains obscenity. They refused to read the book as its content goes against their religious and moral beliefs (Grasso, 2015). Professors might contend on the issue of academic freedom. However, obscenity is prevalent in the book Fun Home and is gratuitously portrayed through the graphic. This could violate the moral principles of some students. By incorporating this book in the curriculum, the professors would not be â€Å"redeeming social importance† (Rault 100). The dictionary definition of obscenity is the depiction of sexual matters in a way that infringes on standards of decency and morality. However, the extent to which it contravenes the standards of morality is entirely subjective. My interpretation derives from a Supreme Court ruling that concluded in a 1966 case that in order to establish obscenity, the content must be â€Å"utterly without redeeming social importance† (Rault 100). I agree with those professors who argue academic freedom:Show MoreRelatedTop 1 Cause for Project Failure65023 Words   |  261 Pagesfailure. Looking forward to sharing learning. [Mathew@PM4K] @ http://www.anishmathaimathew.blogspot.com Karl Kerr Project Planner at Knorr-Bremse Rail Systems UK Limited Anish, Wow a great question and one that should generate plenty of feedback! I have worked on many projects in my time in the following sectors: Nuclear, Public Sector, Rail Telecommunications. They all have one thing in common: they have in place Project Management systems

Nursing is a field that requires a true understanding...

Nursing is a field that requires a true understanding about ethics. Ethics by definition is the study or use of moral belief. Morality is the the act of actually following these beliefs. So to follow the code of ethics is to be moral. Each nurse is expected to follow the standards set out by the code of ethics from the American Nurse Association (ANA) and from his or her place of employment in order to practice morally. The ANAs code of ethics highlights that a nurse should care for all patients equally regardless of race, sex, creed, sexual orientation, medical diagnosis or source of payment (Smeltzer, Bare, Hinkle Cheever, 2010). The nurse must be committed to the care and protection of the patient and is responsible for the†¦show more content†¦Also, if a nurse encounters a difficult patient whether it is because they interfere with them on a personal level (the patient may have a condition that a family member of theirs had) or simply because of personality clashes, the nurse is not able to refuse that patient assignment. Another example is if the family of the patient disagrees with their healthcare decisions of the patient. The wishes of the patient are respected as long as they are alert and oriented or clearly state their wishes in an advanced directive. Only when there is written confirmation that the patient is unable to make informed decisions is the family consulted (L. Stewart, personal communication, January 24, 2014). The code of ethics for this facility is not necessarily in perfect congruence with that of the ANA. Unlike the ANA, FHD highlights the delivery of financially responsible care. Contrastingly, the ANA actually states that focusing on economic saving can, â€Å"pose new possibilities of conflict between economic self-interest and professional integrity† (American Nurses Association, 2001). It is also interesting that the ANA code asserts that a nurse should not remain employed by the facility, or should not fo llow facility policy if it violates patient rights or any principle of the ANA code of ethics. Although this is not addressed in FHDs code of ethics, obviously this facility would not endorse intentionally disobeying policy just because aShow MoreRelatedSdfs1549 Words   |  7 PagesAbout the Company Bharti Airtel Limited, commonly known as  Airtel, is an Indian  telecommunications  services company headquartered at  New Delhi, India. It operates in 20 countries across South Asia, Africa and the  Channel Islands. Airtel has  GSM network  in all countries, providing  2G,  3G  and  4G  services depending upon the country of operation. Airtel is the worlds  third-largest mobile telecommunications company  with over 261 million subscribers across 20 countries as of August 2012.  It is the  largestRead MoreAir Traffic Control System Of Sdf1139 Words   |  5 PagesSMF’s location provides for the most efficient flight operations and the future airport developments will cost-effectively satisfy the growing aviation demand in the area. The runway, taxiway, and ramp configurations at SMF provide an efficient access system for arriving and departing aircraft today, but there are current assessments in progress of runway lengths required for future n on-stop service to European and Asian destinations. The current instrument and visual landing systems meet the requiredRead MoreThe Challenges Of Smallholder Dairy Farming Systems1460 Words   |  6 PagesClimate change and variability (CCV) is one of the greatest challenges to Smallholder Dairy Farming Systems (SDFS) yet demand for Animal Source Foods (ASF) is projected to rise (FAO, 2011) due to population growth, urban migration coupled with increased spending in developing countries as a result of improved incomes (Giovannucci et al., 2012). In Kenya SDFS form one of the most important key livelihood strategies of rural communities with dominance over the national milk sector accounting for 80%Read MoreIsis Essay922 Words   |  4 Pagesknown as ISIL, has been losing some of their major territories in the recent months. A liberation group, Syrian Democratic Forces (SDF), is a union made up of both Kurdish and Arab forces backed by the United States has been fighting for the l iberation of states that ISIS have taken over. The fight for total liberation from ISIS is a long way from being over, but SDF forces continuing fighting for the cause. Even though Raqqa is now liberated, there will be a shadow over the city for the many yearsRead MoreStock and Company1446 Words   |  6 Pagesclick on stocks Which of the following functions give you direct access to company filings for full transparency to the financeial statements? I. CF II. DES III. FA IV. EEO -I and III onl S F Sf F S F Gs Df H S Fg S F H Sdf Sgd Fg Sd Fgsdfffffffffffffffffffffgy Which classification system is available with EQS as a criteria for your screen of equities? -All the Above On what screen is it possible to generate a printable report detailing background informationRead MoreJapans The Soviet War1173 Words   |  5 Pagestaken measures to create security forces within the framework of its constitution. Although seemingly restrictive, Article 9 has been carefully interpreted to permit the existence of defence forces in Japan. Since 1958, Japan’s â€Å"Self-Defense Forces† (SDF) have included an army, navy and air force over 200,000 members strong. The SDF’s â€Å"stated mission is to protect the Japanese mainland,† but as Japan’s economic power grew, it began to feel pressure to pull its weight in the international community.Read MoreMechanisms Involved Into Wound Healing And Heart Function2811 Words   |  12 Pagescapability, the mesenchymal stem cell (MSC) can secrete and supply a large amount of vascular endothelial growth factor (VEGF) (Tang J et al., 2009). This response can be overexpressed, resulting in tumor formation. The stromal-derived factor-1 alpha (SDF-1ÃŽ ±) plays an important role in the recruitment of stem cells to the injured tissues of the heart. Previous studies have shown that cardiac stem cells (CSCs) can differentiate into cardiomyocytes, smooth muscle cells, or endothelial cells (Wang K etRead MoreRadius Essay984 Words   |  4 Pageseverready_radius.pl and rad_qry.pl 3. rad_qry.pl This script copies order info from ISIS - RCI_RADIUS to sos.FMDump table Modules Required: 1. DBI 2. MNS::Sos [Custom module build for all iPass Unity Backend components] fadsf f saf sdf sa fs fdsa fsa fdsa f safdsa f f f sa fs fsa fsaf af as ff safa ï » ¿The radius component makes sure that all the PPPoE information in ISIS database is synced into the radius server MySQL database. There are three main scripts that’sRead MoreApplications Of Msc Essay1127 Words   |  5 Pagestumor microenvironment. Although the underlying mechanism of this migration is yet to be precisely described, studies have shown that the migration of these cells depends on the interaction between a number of chemokines and their receptors, including SDF-1/ CXCR, SCF/C-Kit, HGF/c-Met, VEGF/VEGF-R and PDGF /PDGF-R. These chemokines and their receptors play an important role in the migration of hematopoietic stem cells and leukocytes that respond to injuries and inflammation. Therefore they are thoughtRead MoreWage Gaps and Demographic Behavior1555 Words   |  7 Pagesdata sources, the Sample Detail file (SDF), which contains all individual responses to the 1990 Decennial Census one-in-six Long Form, and the 1990 Standard Statistical Establishment List (SSEL), which is an administrative database containing information for all business establishments operating in the United States in 1990. We construct the NWECD by using detailed location and industry information available in both data sets to match worker records in the SDF to employer records in the SSEL. In this

Risk & Uncertainty Regarding IT System-Free-Samples for Students

Questions: 1.Use a diagram to Illustrate Current Security Risks and concerns considered by the VIC Government. 2.Provide detailed explanation of the diagram and identify the areas of: high, medium, medium-low, and low risk exposure. 3.Carry out comparative analysis of the Deliberate and Accidental Threats and rank those threats in order of importance. 4.While drawing upon theories, tools and patterns covered in the subject as well as your own research, explain the challenges that the VIC government is going to face while deciding on whether security/risk management should be carried out internally or externally. 5.Explain the difference between the Concepts of Risk and Uncertainty. 6.Discuss and evaluate different approaches available to the VIC government for risk control and mitigation. Answers: Introduction The main objective of this report is to discuss about the possible risks and uncertainty of regarding different ICT projects and the methods which can be applied against those risks. Risk management is an important part of the IT system. Due to various reasons there are many possibilities of risks. Security is the main parameter that has to be given the highest priority in case of an IT system management (Chance Brooks, 2015). VIC government analyzes these kinds of risks and finds out the possible methods that can be used to overcome these risks and to make the system more secured. There are many differences between risk and uncertainty. Those are discussed in details in this report. Threads are an important part in case of risk detection in the information system. Different kinds of threads are also discussed in this report. The main differences between the accidental and deliberate threads are given also. In this report various type of risks regarding the information system are given along with the methods which can be used against the risks. These types of risks can break down the security system of the organisation. Different methods regarding risk management have been discussed in this report. These methods are discussed with respect to the regulation and standards of the VIC governments 1.Diagram regarding the security risks and concerns considered by the VIC government. Figure: Current security risks and the methods to prevent those risks (Source: Author) 2.Explanation of the diagram and identification of different levels of risk exposure. According to the VIC government there are various kinds of risks in the Information technology and also other physical peripherals regarding the information system. The diagram explains the security risks and the measures of the risks and the methods to oppose those issues according to the VIC government standards (Aldunce et al., 2015). The main security problems or risks regarding the information system are ICT security risks, physical risks, hacking risks, risks regarding malware and virus. The security of the information system is the most important criteria for the system to make it properly work and to increase the security and reliability of the system to public (American Diabetes Association., 2016). The ICT security refers to the security issues related to the information communication technology. In various organisations ICT systems are used as the basic and fundamental structure of the information system. This current generation is highly dependent on the internet for seve ral purposes and so the security is highly affected as internet is the source of various kinds of viruses, malwares and hackers. The main problems that the ICT problems are becoming more and more complex due to the presence of the sharing and distributive capabilities of the internet system and the bugs distributed by this system (Becken Hughey, 2013). ICT environments are also becoming more heterogeneous and complex and as a result this can be seen that number of the intrusions is becoming more and more. The impact of the wireless radio connection has created new possibilities of the risks regarding the cyber attacks. Internet has a hierarchical structure itself and it is becoming more and more inaccessible from the outside users (Bianco et al., 2017). As a result the intranet users and the other users can not deal with the complexity of the internet system which is causing due to the outsourcing (Brindley, 2017). The amount of physical risks is also increasing day by day. Physica l risk refers to the problems caused by the hardware and the peripherals of the system. This problem makes the system slow and there is also a high risk of stopping the whole system in case of the large amount of hardware or peripheral issues (Chance Brooks, 2015). The hardware and the peripherals are connected to the main system to transfer the data as the input and output of the system. The information sometimes itself become harmful for the system. The bugs present in some information can harm the hardware like modem and servers. In this case the risk is also very high in nature as the main source of the internet connection is the modem and the server. Another kind of dangerous risk to the information system is the chances of hacking attacks (Bianco et al., 2017). The hackers most often attack the sources of information and make some vulnerable changes to the source. As a result it can harm the whole system which is connected to the source. The number of hacking attacks is incre asing day by day. This kind of attack can be overcome by use of different methods like encryption and others which are distributed further. Malware and viruses are also one of the most important sources of the cyber security issues and risks. Sometimes the malware and the viruses are spread by intention from different kind of sources (Brindley, 2017). The amount of the sources which are spreading the viruses and the malwares, are increasing day by day. There are several kinds of viruses which can lead to damage software as well as the hardware system also. From the priority point of view of the dangers of the system the main issues are divided in different parts and those are high, medium, medium-low and low. The security issues caused by the ICT risks are very high. As the IST system deals with the information records of public information that can be in danger in case of different risks. The risks due to the hardware and peripherals are low as this kind of issues can be recovered very easily and also those are very few numbers. The dangers due to hacking are high as the information regarding the system security can be hacked by those hackers. Those hacking attacks can affect various database systems like the hospital, military base, transportation system and many more. The danger regarding the viruses and the malware are of medium risk (Cole et al., 2013). These malware and virus can a make a system totally failed and thus it can reach harm to the system that cannot be restored. If the system has to be regained then the malware and the viruses must be removed from the system. In the next level of the diagram the methods are discussed according to the importance of their usage. The methods are used to oppose the issues regarding the problems generated by the given causes (Davies, 2014). The VIC government has some standards and regulations regarding the methods which are used to oppose the problems regarding the information system. The main methods those are used are security management framework, security incident management, security plans, government plans, security risk management, security policies and procedures, business continuity management, security obligations, security training and awareness, information access, contracted service providers, compliance, information value, information management, information sharing, personnel lifecycle, ICT lifecycle and physical lifecycle (DeAngelo Stulz, 2015). These are some parameters related to the methods which can be used against the issues related to the IT system. 3.Comparative analysis of the Deliberate and Accidental Threats and ranking of those threats on the basis of importance The threads can be identified as the sequential form of some responses to a message. The form of the thread can of different types like deliberate thread or accidental threads. The threads are one of the most important things that can be used in the computing system for several implications (Ferguson et al., 2013). The single threading refers to the sequential processing of the instruction at a time and multi threading refers to the threading done in the operating system having multitasking. The threading can be off different types on the basis of the occurrence of the threads. The Accidental thread can also be present in the system by any time or any process occurrence (Glendon, Clarke McKenna, 2016). The application of the system depends upon the sudden change of sequences regarding the message. In case of the security of the system some sequential applications are there which can take place by intention. This type of sequential applications is called deliberate thread. The main d ifference between the accidental and the deliberate thread is that the occurrence of the sequences of the thread. In case of accidental thread the sequence can be present in any order (Heazle et al., 2013). In case of deliberate thread the sequences can be of different orders. In many cases it is seen that both the deliberate and the accidental threads are used in many organisations. Sometimes threads are used to get the information from the system. The system is also sometimes more important in case of using the accidental thread. The accidental thread is more usable in case of the field where the system is used to be suddenly responsive. In case of deliberate thread the system should be of some particular use. The deliberate thread can make the system more useful to the sequences related to the system (Holt et al., 2015). In most of the organisations like Google, Facebook security is considered as the subject to be given the highest priority. The priority should be given to the th ings like keeping the public security, making the information more secured with the use of new applications like antivirus and all. Encryption is an important feature that is added to the security feature of most of the organisations (Hopkin, 2017). Sometimes the organisations intentionally use some of the threads to get the information from the public which are also important for the organisation point of view. The organisations use deliberate threads in most of the cases. 4.Explanation of the challenges of VIC government regarding the internal and external risk management There are many issues regarding the use of the risk management on the basis of the VIC government regulations. The amount of the risks is increasing day by day due to the use of the internet for organisational and individual need (Howard Beasley, 2017). There are many problems for the VIC government in designing the risk management of the information system. The main problems are in case of using the security methods in various places and networks. There are different rules for different area and networks. To implement the security methods in several networks the organisation has to make a general regulation which is common to all the network system (Howes et al., 2015). For outsourcing the external computers are connected to the main internal computer system and the computers are not sometimes able to transfer the information due to the encryption. To overcome this kind of problems regarding the encryption the security methods are created in such a way that the networking systems c an easily use them. The VIC government should first implement the security methods internally and then those can be applied externally. Application of the methods internally is more preferable as the complicacy can be identified first in this case and can be analyzed (Kettl, 2015). The application of these methods leads to the security of the system faster. 5.Difference between the concepts of Risk and Uncertainty There are many differences between risks and uncertainty. In case of risk the possibility of a future outcome can be predicted but in case of uncertainty the possibility of a future outcome cannot be predicted (Lam, 2014). From this concept it is quite easy to understand that the risk can be managed but the uncertainty cannot be managed and it is uncontrollable. The risks can be defined and measured in terms of quantity by different kinds of analyzing techniques. Uncertainty cannot be measured and quantified. The background of risk is known to us and thus it can be identified previously (Lawrence et al., 2015). The background of the uncertainty is never known to us and it cannot be identified previously. 6.Discussion and evaluation of several methods available to the VIC government for risk management VIC has made a list of different approaches that acts against the security issues in case of a information system. The information system is one of the most sensitive systems in modern world as it deals with the information of various organisations and the individuals. Thus making that information secured is one of the most prior tasks for the organisations to do. The VIC has made one of the most important and useful guidelines in case of information security (McNeil, Frey Embrechts, 2015). Those are security management framework, security incident management, security plans, government plans, security risk management, security policies and procedures, business continuity management, security obligations, security training and awareness, information access, contracted service providers, compliance, information value, information management, information sharing, personnel lifecycle, ICT lifecycle and physical lifecycle (Paton et al., 2014). These methods and features contain some par ticular protocols. In the first method security management framework four protocols are used and those are executive sponsorship of the security management framework which is synchronised with the organisations governance arrangements. The security management framework is implemented and appropriately observed in the organisations governance arrangements (Poniszewska-Mara?da, 2014). This is also improved and updated to make the security environment more advanced. The next method is security risk management. There is executive sponsorship of security risk management and the risks are recorded in this system. The risks are appropriately observed in this system and also are used to improve and update the risk management environment (Tadeusiewicz Horzyk, 2014). One of the most important parts of the security management is the policy making and getting the idea about the procedures. Security requirements are implemented, observed and used in the policy and the system (Pritchard PMP, 20 14). The information access and the security obligations also follow the rules regarding the system. The security obligations are also important in case of the system for opposing the security. The security obligations are embedded into the daily functions and also it observed the organisations personnel management regime. The number of security training and awareness is also important for the system security. It is executive sponsorship of security training and awareness program and it also implemented and is observed for increasing the security (Reason, 2016). The uploaded and advanced version of this methods are utilised in the data security. Security incident management, business continuity management are also using the security requirements and the main thing is to implement the security features regarding this. The management system is also upgraded in order to make the security more strong. Contracted service providers, government services and the security plans also follow the regulations according to the system and the system is also very upgraded and observed. Compliance i s one of the important features of the security regulations (Renz, 2016). This is an assessment of their application of the Victorian Protective Data Security Standards and report these data security features to the organisation (Ross, Fielding Louis, 2014). The security of the organisation due to the compliances is also upgraded and the compliances are observed and upgraded by the organisation to get the reports about the security features. The information value of the organisation is the details regarding the system that can be considered as an import measure of the security and privacy related issues of the organisation. It is also observed and updated for better security (Riedlinger Rea, 2015). The information sharing and information management are two important methods to maintain the data secured. There are three lifecycle that helps the information system to be analysed in secured way. Those are personnel lifecycle, ICT lifecycle and physical lifecycle. These lifecycle meth ods simply refer to some project management techniques that help to make the information system more secured and strong. Conclusion From the above discussion it is concluded that VIC government has made an important rule to overcome several risks. The VIC government has given an important rules and regulations for the risk management of different organisations and information system. From the diagram in the starting of the report, the idea about the risks and security issues can be understood. Then the VIC government has given the idea and outline of the methods that can be used against the risks caused by different risks and the security related issues References Aldunce, P., Beilin, R., Howden, M., Handmer, J. (2015). Resilience for disaster risk management in a changing climate: Practitioners frames and practices. Global Environmental Change, 30, 1-11. American Diabetes Association. (2016). 8. Cardiovascular disease and risk management. Diabetes care, 39(Supplement 1), S60-S71. Becken, S., Hughey, K. F. (2013). Linking tourism into emergency management structures to enhance disaster risk reduction. Tourism Management, 36, 77-85. Bianco, R. J., Arnoux, P. J., Wagnac, E., Mac-Thiong, J. M., Aubin, C. . (2017). Minimizing pedicle screw pullout risks: a detailed biomechanical analysis of screw design and placement. Clinical spine surgery, 30(3), E226-E232. Brindley, C. (Ed.). (2017). Supply chain risk. Taylor Francis. Chance, D. M., Brooks, R. (2015). Introduction to derivatives and risk management. Cengage Learning. Cole, S., Gin, X., Tobacman, J., Topalova, P., Townsend, R., Vickery, J. (2013). Barriers to household risk management: Evidence from India. American Economic Journal: Applied Economics, 5(1), 104-135. Davies, J. C. (2014). Comparing environmental risks: tools for setting government priorities. Routledge. DeAngelo, H., Stulz, R. M. (2015). Liquid-claim production, risk management, and bank capital structure: Why high leverage is optimal for banks. Journal of Financial Economics, 116(2), 219-236. Ferguson, B. C., Brown, R. R., Frantzeskaki, N., de Haan, F. J., Deletic, A. (2013). The enabling institutional context for integrated water management: Lessons from Melbourne. Water research, 47(20), 7300-7314. Glendon, A. I., Clarke, S., McKenna, E. (2016). Human safety and risk management. Crc Press. Heazle, M., Tangney, P., Burton, P., Howes, M., Grant-Smith, D., Reis, K., Bosomworth, K. (2013). Mainstreaming climate change adaptation: An incremental approach to disaster risk management in Australia. Environmental Science Policy, 33, 162-170. Holt, T. J., Smirnova, O., Chua, Y. T., Copes, H. (2015). Examining the risk reduction strategies of actors in online criminal markets. Global Crime, 16(2), 81-103. Hopkin, P. (2017). Fundamentals of risk management: understanding, evaluating and implementing effective risk management. Kogan Page Publishers. Howard, D. L., Beasley, L. M. (2017). Pregnant with a perforated levonorgestrel intrauterine system and visible threads at the cervical os. BMJ Case Reports, 2017, bcr-2017. Howes, M., Tangney, P., Reis, K., Grant-Smith, D., Heazle, M., Bosomworth, K., Burton, P. (2015). Towards networked governance: improving interagency communication and collaboration for disaster risk management and climate change adaptation in Australia. Journal of Environmental Planning and Management, 58(5), 757-776. Kettl, D. F. (2015). The job of government: Interweaving public functions and private hands. Public Administration Review, 75(2), 219-229. Lam, J. (2014). Enterprise risk management: from incentives to controls. John Wiley Sons. Lawrence, J., Sullivan, F., Lash, A., Ide, G., Cameron, C., McGlinchey, L. (2015). Adapting to changing climate risk by local government in New Zealand: institutional practice barriers and enablers. Local Environment, 20(3), 298-320. McNeil, A. J., Frey, R., Embrechts, P. (2015). Quantitative risk management: Concepts, techniques and tools. Princeton university press. Paton, D., Johnston, D., Mamula-Seadon, L., Kenney, C. M. (2014). Recovery and development: perspectives from New Zealand and Australia. In Disaster and development (pp. 255-272). Springer International Publishing. Poniszewska-Mara?da, A. (2014). Selected aspects of security mechanisms for cloud computingcurrent solutions and development perspectives. Pritchard, C. L., PMP, P. R. (2014). Risk management: concepts and guidance. CRC Press. Reason, J. (2016). Managing the risks of organizational accidents. Routledge. Renz, D. O. (2016). The Jossey-Bass handbook of nonprofit leadership and management. John Wiley Sons. Riedlinger, M., Rea, J. (2015). Discourse ecology and knowledge niches: Negotiating the risks of radiation in online Canadian forums, post-Fukushima. Science, Technology, Human Values, 40(4), 588-614. Ross, V. L., Fielding, K. S., Louis, W. R. (2014). Social trust, risk perceptions and public acceptance of recycled water: Testing a social-psychological model. Journal of environmental management, 137, 61-68. Tadeusiewicz, R., Horzyk, A. (2014, November). Man-Machine Interaction Improvement by Means of Automatic Human Personality Identification. In IFIP International Conference on Computer Information Systems and Industrial Management (pp. 278-289). Springer, Berlin, Heidelberg.